About the Settle Conservation Area
The Settle Conservation Area covers about 4.9 hectares and was designated by Yorkshire Dales National Park in 1972. Inside the boundary are 7 listed buildings, all Grade II.
What changes inside the conservation area
Conservation areas are “Article 2(3) land”. You keep most permitted development rights, but these are removed or tightened.
ProjectElsewhereIn Settle CA
- Rear extensionElsewhere: 3 m · 6 m with PANo 6 m / 8 m prior approval
- Two-storey extensionElsewhere: 3 mNeeds planning permission
- Side extensionElsewhere: Half the widthNeeds planning permission
- Loft conversionElsewhere: 50 m³Needs planning permission
- Garden roomElsewhere: 2.5 m high by boundariesNot beside the house
- PorchElsewhere: 3 m²Same limits
- Solar panelsElsewhere: 0.2 m projectionSame limits
- Air source heat pumpElsewhere: 1 unitNot facing the road
- Fences, walls and gatesElsewhere: 2 m · 1 m by a roadSame limits
- External claddingElsewhere: Matching materialsNeeds planning permission
- Tree workElsewhere: No notice6 weeks’ notice to the council
- Demolition (over 115 m³)Elsewhere: AllowedNeeds planning permission
Limits for a semi-detached house under the GPDO 2015. An Article 4 direction can remove more.
Listed buildings in the conservation area
Any work affecting these needs listed building consent, inside or out. Each links to its entry on the National Heritage List.
- 3, Albert HillGrade II
- 5, Albert HillGrade II
- Campbell'sGrade II
- Cottage to Left of Campbell'sGrade II
- Former army drill hall, Castlebergh HallGrade II
- Former Zion Independent Congregational ChapelGrade II
- The TanneryGrade II
The council’s appraisal
WEBSettle Conservation Area AppraisalYorkshire Dales National Park’s description of the area’s character — what planners look at when you apply.Open on council site ↗Nearby conservation areas
Boundary and listed buildings from Yorkshire Dales National Park and Historic England via planning.data.gov.uk (OGL). Guidance only — not an official council check.