About the Abingdon - Albert Park Conservation Area
The Abingdon - Albert Park Conservation Area covers about 28 hectares and was designated by Vale of White Horse District Council in 1975. Inside the boundary are 5 listed buildings, all Grade II. Part of the area lies in flood zone 2, so an extension may need a flood risk assessment.
What changes inside the conservation area
Conservation areas are “Article 2(3) land”. You keep most permitted development rights, but these are removed or tightened.
- Rear extensionElsewhere: 3 m · 6 m with PANo 6 m / 8 m prior approval
- Two-storey extensionElsewhere: 3 mNeeds planning permission
- Side extensionElsewhere: Half the widthNeeds planning permission
- Loft conversionElsewhere: 50 m³Needs planning permission
- Garden roomElsewhere: 2.5 m high by boundariesNot beside the house
- PorchElsewhere: 3 m²Same limits
- Solar panelsElsewhere: 0.2 m projectionSame limits
- Air source heat pumpElsewhere: 1 unitNot facing the road
- Fences, walls and gatesElsewhere: 2 m · 1 m by a roadSame limits
- External claddingElsewhere: Matching materialsNeeds planning permission
- Tree workElsewhere: No notice6 weeks’ notice to the council
- Demolition (over 115 m³)Elsewhere: AllowedNeeds planning permission
Limits for a semi-detached house under the GPDO 2015. An Article 4 direction can remove more.
Listed buildings in the conservation area
Any work affecting these needs listed building consent, inside or out. Each links to its entry on the National Heritage List.
- Church of St MichaelGrade II
- Conduit HouseGrade II
- Monument to Prince AlbertGrade II
- Wall and Gate Piers to Waste CourtGrade II
- Waste CourtGrade II
Nearby conservation areas
Boundary and listed buildings from Vale of White Horse District Council and Historic England via planning.data.gov.uk (OGL). Guidance only — not an official council check.