Little WalthamConservation Area

What being inside the Little Waltham Conservation Area means for extensions, lofts, windows and trees — and how to check whether your house is inside the boundary.

Designated

1991

Size

26 ha

Listed buildings inside

33

Article 4

1 found

250 m
Conservation area Listed building

About the Little Waltham Conservation Area

The Little Waltham Conservation Area covers about 26 hectares and was designated by Chelmsford City Council in 1991. Inside the boundary are 33 listed buildings, all Grade II. 1 Article 4 direction over the area removes further householder rights, on top of the conservation area limits below. Part of the area lies in flood zone 3, so an extension may need a flood risk assessment.

What changes inside the conservation area

Conservation areas are “Article 2(3) land”. You keep most permitted development rights, but these are removed or tightened.

Limits for a semi-detached house under the GPDO 2015. An Article 4 direction can remove more.

Article 4 directions here

These overlap the conservation area. Householder directions remove more of the rights above; change-of-use ones don’t affect extending a house.

  • Ash Tree Stud, Little WalthamHouseholder works

Listed buildings in the conservation area

Any work affecting these needs listed building consent, inside or out. Each links to its entry on the National Heritage List.

Show all 33 listed buildings ↓

Streets in the conservation area

Streets with listed buildings inside the boundary. Boundaries often split a street — check your exact address.

The StreetBrook Hill

The council’s appraisal

WEBLittle Waltham Conservation Area AppraisalChelmsford City Council’s description of the area’s character — what planners look at when you apply.Open on council site ↗

Nearby conservation areas

Boundary and listed buildings from Chelmsford City Council and Historic England via planning.data.gov.uk (OGL). Guidance only — not an official council check.