About the Burton Manor Village Conservation Area
The Burton Manor Village Conservation Area covers about 7.2 hectares and was designated by Stafford Borough Council in 2008. No listed buildings are recorded inside the boundary. 1 Article 4 direction over the area removes further householder rights, on top of the conservation area limits below. Part of the area lies in flood zone 3, so an extension may need a flood risk assessment.
What changes inside the conservation area
Conservation areas are “Article 2(3) land”. You keep most permitted development rights, but these are removed or tightened.
- Rear extensionElsewhere: 3 m · 6 m with PANo 6 m / 8 m prior approval
- Two-storey extensionElsewhere: 3 mNeeds planning permission
- Side extensionElsewhere: Half the widthNeeds planning permission
- Loft conversionElsewhere: 50 m³Needs planning permission
- Garden roomElsewhere: 2.5 m high by boundariesNot beside the house
- PorchElsewhere: 3 m²Same limits
- Solar panelsElsewhere: 0.2 m projectionSame limits
- Air source heat pumpElsewhere: 1 unitNot facing the road
- Fences, walls and gatesElsewhere: 2 m · 1 m by a roadSame limits
- External claddingElsewhere: Matching materialsNeeds planning permission
- Tree workElsewhere: No notice6 weeks’ notice to the council
- Demolition (over 115 m³)Elsewhere: AllowedNeeds planning permission
Limits for a semi-detached house under the GPDO 2015. An Article 4 direction can remove more.
Article 4 directions here
These overlap the conservation area. Householder directions remove more of the rights above; change-of-use ones don’t affect extending a house.
- Burton Manor Article 4Householder works
The council’s appraisal
WEBBurton Manor Village Conservation Area AppraisalStafford Borough Council’s description of the area’s character — what planners look at when you apply.Open on council site ↗Nearby conservation areas
Boundary and listed buildings from Stafford Borough Council and Historic England via planning.data.gov.uk (OGL). Guidance only — not an official council check.