About the Kingston Blount Conservation Area
The Kingston Blount Conservation Area covers about 13 hectares and was designated by South Oxfordshire District Council in 1984. Inside the boundary are 12 listed buildings, all Grade II.
What changes inside the conservation area
Conservation areas are “Article 2(3) land”. You keep most permitted development rights, but these are removed or tightened.
- Rear extensionElsewhere: 3 m · 6 m with PANo 6 m / 8 m prior approval
- Two-storey extensionElsewhere: 3 mNeeds planning permission
- Side extensionElsewhere: Half the widthNeeds planning permission
- Loft conversionElsewhere: 50 m³Needs planning permission
- Garden roomElsewhere: 2.5 m high by boundariesNot beside the house
- PorchElsewhere: 3 m²Same limits
- Solar panelsElsewhere: 0.2 m projectionSame limits
- Air source heat pumpElsewhere: 1 unitNot facing the road
- Fences, walls and gatesElsewhere: 2 m · 1 m by a roadSame limits
- External claddingElsewhere: Matching materialsNeeds planning permission
- Tree workElsewhere: No notice6 weeks’ notice to the council
- Demolition (over 115 m³)Elsewhere: AllowedNeeds planning permission
Limits for a semi-detached house under the GPDO 2015. An Article 4 direction can remove more.
Listed buildings in the conservation area
Any work affecting these needs listed building consent, inside or out. Each links to its entry on the National Heritage List.
- 1, Park LaneGrade II
- 2, Park LaneGrade II
- Barns and Outbuilding Approximately 30 Metres North of the Old Tudor HouseGrade II
- BrooksideGrade II
- Chiltern CottageGrade II
- Ferndale HouseGrade II
- Granary Approximately 10 Metres North of Town FarmhouseGrade II
- Little ThatchGrade II
- Moat ManorGrade II
- The Old Tudor HouseGrade II
- Town FarmhouseGrade II
- Wall Attached to West End of Number 1Grade II
Nearby conservation areas
Boundary and listed buildings from South Oxfordshire District Council and Historic England via planning.data.gov.uk (OGL). Guidance only — not an official council check.