BelaughConservation Area

What being inside the Belaugh Conservation Area means for extensions, lofts, windows and trees — and how to check whether your house is inside the boundary.

Designated

1973

Size

10.0 ha

Listed buildings inside

1

Article 4

4 found

250 m
Conservation area Listed building

About the Belaugh Conservation Area

The Belaugh Conservation Area covers about 10.0 hectares and was designated by Broadland District Council in 1973. Inside the boundary is 1 listed building, all Grade I. The most significant is Church of St Peter, Grade I. 4 Article 4 directions over the area remove further householder rights, on top of the conservation area limits below. Part of the area lies in flood zone 3, so an extension may need a flood risk assessment.

What changes inside the conservation area

Conservation areas are “Article 2(3) land”. You keep most permitted development rights, but these are removed or tightened.

Limits for a semi-detached house under the GPDO 2015. An Article 4 direction can remove more.

Article 4 directions here

These overlap the conservation area. Householder directions remove more of the rights above; change-of-use ones don’t affect extending a house.

  • Land adjacent to river; to west of The StreetHouseholder works
  • Broads Authority Conservation AreaHouseholder works
  • Broads Authority Conservation AreaHouseholder works
  • Broads Authority Conservation AreaHouseholder works

Listed buildings in the conservation area

Any work affecting these needs listed building consent, inside or out. Each links to its entry on the National Heritage List.

The council’s appraisal

WEBBelaugh Conservation Area AppraisalBroadland District Council’s description of the area’s character — what planners look at when you apply.Open on council site ↗

Nearby conservation areas

Boundary and listed buildings from Broadland District Council and Historic England via planning.data.gov.uk (OGL). Guidance only — not an official council check.